tetano
Editor, Senior Moderator
Sensors (Basel)
. 2022 Jan 19;22(3):751.
doi: 10.3390/s22030751.
SARS-CoV-2 Detection Using Optical Fiber Based Sensor Method
Muhammad Usman Hadi[SUP] 1 [/SUP], Menal Khurshid[SUP] 2 [/SUP]
Affiliations
Abstract
The SARS-CoV-2 Coronavirus disease, also known as the COVID-19 pandemic, has engendered the biggest challenge to human life for the last two years. With a rapid increase in the spread of the Omicron variant across the world, and to contain the spread of COVID-19 in general, it is crucial to rapidly identify this viral infection with minimal logistics. To achieve this, a novel plastic optical fiber (POF) U-shaped probe sensing method is presented for accurate detection of SARS-CoV-2, commonly known as the COVID-19 virus, which has the capability to detect new variants such as Omicron. The sample under test can be taken from oropharyngeal or nasopharyngeal via specific POF U-shaped probe with one end that is fed with a laser source while the other end is connected to a photodetector to receive the response and postprocess for decision-making. The study includes detection comparison with two types of POF with diameters of 200 and 500 µm. Results show that detection is better when a smaller-diameter POF is used. It is also seen that the proposed test bed and its envisaged prototype can detect the COVID-19 variants within 15 min of the test. The proposed approach will make the clinical diagnosis faster, cheaper and applicable to patients in remote areas where there are no hospitals or clinical laboratories due to poverty, geographic obstacles, or other factors.
Keywords: COVID-19; COVID-19 detection; PCR; SARS-CoV-2; U-shaped probe; optical fiber sensor.
. 2022 Jan 19;22(3):751.
doi: 10.3390/s22030751.
SARS-CoV-2 Detection Using Optical Fiber Based Sensor Method
Muhammad Usman Hadi[SUP] 1 [/SUP], Menal Khurshid[SUP] 2 [/SUP]
Affiliations
- PMID: 35161497
- DOI: 10.3390/s22030751
Abstract
The SARS-CoV-2 Coronavirus disease, also known as the COVID-19 pandemic, has engendered the biggest challenge to human life for the last two years. With a rapid increase in the spread of the Omicron variant across the world, and to contain the spread of COVID-19 in general, it is crucial to rapidly identify this viral infection with minimal logistics. To achieve this, a novel plastic optical fiber (POF) U-shaped probe sensing method is presented for accurate detection of SARS-CoV-2, commonly known as the COVID-19 virus, which has the capability to detect new variants such as Omicron. The sample under test can be taken from oropharyngeal or nasopharyngeal via specific POF U-shaped probe with one end that is fed with a laser source while the other end is connected to a photodetector to receive the response and postprocess for decision-making. The study includes detection comparison with two types of POF with diameters of 200 and 500 µm. Results show that detection is better when a smaller-diameter POF is used. It is also seen that the proposed test bed and its envisaged prototype can detect the COVID-19 variants within 15 min of the test. The proposed approach will make the clinical diagnosis faster, cheaper and applicable to patients in remote areas where there are no hospitals or clinical laboratories due to poverty, geographic obstacles, or other factors.
Keywords: COVID-19; COVID-19 detection; PCR; SARS-CoV-2; U-shaped probe; optical fiber sensor.