tetano
Editor, Senior Moderator
Sci Total Environ
. 2022 Apr 7;155072.
doi: 10.1016/j.scitotenv.2022.155072. Online ahead of print.
Overcoming challenges due to enhanced biomedical waste generation during COVID-19 pandemic
Priti Chhanda Ojha[SUP] 1 [/SUP], Swati Sucharita Satpathy[SUP] 2 [/SUP], Akash Kumar Ojha[SUP] 3 [/SUP], Lala Behari Sukla[SUP] 2 [/SUP], Debabrata Pradhan[SUP] 4 [/SUP]
Affiliations
Abstract
Biomedical wastes (BMWs) are potentially infectious to the environment and health. They are co-dependent and accumulative during the ongoing coronavirus disease-2019(COVID-19) pandemic. In India the standard treatment processes of BMWs are incineration, autoclaving, shredding, and deep burial; however, incineration and autoclaving are the leading techniques applied by many treatment providers. These conventional treatment methods have several drawbacks in terms of energy, cost, and emission. But the actual problem for the treatment providers is the huge and non-uniform flow of the BMWs during the pandemic. The existing treatment methods are lacking flexibility for the non-uniform flow. The Government of India has provisionally approved some new techniques like plasma pyrolysis, sharp/needle blaster, and PIWS-3000 technologies on a trial basis. But they are all found to be inadequate in the pandemic. Therefore, there is an absolute requirement to micromanage the BMWs based on certain parameters for the possible COVID-19 like pandemic in the future. Segregation is a major step of the BMW management. Its guideline may be shuffled as segregation at the entry points followed by collection instead of the existing system of the collection followed by segregation. Other steps like transportation, location of treatment facilities, upgradation of the existing treatment facilities, and new technologies can solve the challenges up to a certain extent. Technologies like microwave treatment, alkaline hydrolysis, steam sterilization, biological treatment, catalytic solar disinfection, and nanotechnology have a lot of scopes for the treatment of BMWs. Hi-tech approaches in handling and transportation are found to be fruitful in the initial steps of BMW management. End products of the treated BMWs can be potentially fabricated for the application in the built environment. Some policies need to be re-evaluated by the health care facilities or government administrations for efficient BMW management.
Keywords: Biomedical wastes; COVID-19 pandemic; Policies; Treatment facilities; Upgrading conventional techniques.
. 2022 Apr 7;155072.
doi: 10.1016/j.scitotenv.2022.155072. Online ahead of print.
Overcoming challenges due to enhanced biomedical waste generation during COVID-19 pandemic
Priti Chhanda Ojha[SUP] 1 [/SUP], Swati Sucharita Satpathy[SUP] 2 [/SUP], Akash Kumar Ojha[SUP] 3 [/SUP], Lala Behari Sukla[SUP] 2 [/SUP], Debabrata Pradhan[SUP] 4 [/SUP]
Affiliations
- PMID: 35398414
- DOI: 10.1016/j.scitotenv.2022.155072
Abstract
Biomedical wastes (BMWs) are potentially infectious to the environment and health. They are co-dependent and accumulative during the ongoing coronavirus disease-2019(COVID-19) pandemic. In India the standard treatment processes of BMWs are incineration, autoclaving, shredding, and deep burial; however, incineration and autoclaving are the leading techniques applied by many treatment providers. These conventional treatment methods have several drawbacks in terms of energy, cost, and emission. But the actual problem for the treatment providers is the huge and non-uniform flow of the BMWs during the pandemic. The existing treatment methods are lacking flexibility for the non-uniform flow. The Government of India has provisionally approved some new techniques like plasma pyrolysis, sharp/needle blaster, and PIWS-3000 technologies on a trial basis. But they are all found to be inadequate in the pandemic. Therefore, there is an absolute requirement to micromanage the BMWs based on certain parameters for the possible COVID-19 like pandemic in the future. Segregation is a major step of the BMW management. Its guideline may be shuffled as segregation at the entry points followed by collection instead of the existing system of the collection followed by segregation. Other steps like transportation, location of treatment facilities, upgradation of the existing treatment facilities, and new technologies can solve the challenges up to a certain extent. Technologies like microwave treatment, alkaline hydrolysis, steam sterilization, biological treatment, catalytic solar disinfection, and nanotechnology have a lot of scopes for the treatment of BMWs. Hi-tech approaches in handling and transportation are found to be fruitful in the initial steps of BMW management. End products of the treated BMWs can be potentially fabricated for the application in the built environment. Some policies need to be re-evaluated by the health care facilities or government administrations for efficient BMW management.
Keywords: Biomedical wastes; COVID-19 pandemic; Policies; Treatment facilities; Upgrading conventional techniques.